雷电通道水平电场影响因素分析

影响雷电通道产生的水平电场因素众多,分析其影响因素对电力系统的雷电防护具有重要意义。文中利用运动电荷电磁场方程求解得到闪电回击通道的水平电场和方位磁场,并结合C-R 算法,得到了有限电导率地面上方的水平电场。依据运动电荷电磁场方程的特征分析了不同回击速度、不同距离、不同电导率对雷击产生的水平电场的影响。得出以下结论:水平电场随回击速度增大而减小;水平电场波形呈双极性特征且水平距离越大或电导率越小负向偏移越明显。这些研究结论为输电线路雷电过电压计算打下良好的基础。与其他方法相比,本文方法可以避免远距离电磁场计算中的震荡问题和积分方程的奇异问题。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

并联混合动力汽车能量管理与转矩协调控制策略

研究并联混合动力汽车的控制策略。基于发动机输出转矩最优的能量管理策略,对并联混合动力汽车在工作模式切换中的相互配合问题,提出发动机动态转矩控制+动力电池荷电状态(state of charge,SOC)干预+电机转矩补偿控制的转矩协调控制方法;在Matlab/Simulink/Stateflow平台搭建整车能量管理控制策略模型,控制发动机工作在高效率区,保证发动机输出最优转矩;根据电池的SOC干预电机的运行状态,协同发动机提供整车需求转矩。在Cruise平台下建立整车模型,以新欧洲驾驶周期作为循环工况进行离线仿真。结果表明,能量管理与转矩协调控制策略能够有效分配电机和发动机的转矩输出,满足混合动力汽车多模式切换的要求。     

A PV installation framework concerning electricity variable rates

This paper assesses building integrated photovoltaic (BIPV) installation parameters based on the profit generated by a photovoltaic system. It takes into consideration a home building case study and it investigates its monthly energy demand based on a specific location and a typical occupancy. The capability of a photovoltaic (PV) system to generate more profit occurs when solar intensity is maximum while the electric energy price is at its highest rate. The paper traces a framework that encompasses different aspects such as energy demand, energy price, and solar intensity. This framework identifies profit alternatives according to different installation parameters. A tool that predicts a PV installation hourly electric energy production is developed. The profit generated is simulated for home buildings located in Beirut (Lebanon) and Xihua (China), both at 33.8° latitude north. The paper highlights a new approach for BIPV installations, taking into account weather conditions, energy demand, and electric energy utility rates.     

Broadband bowtie belt nanoantennas

In this article, we study a linear array of bowtie nanoantennas placed between two metallic strips that can work from 800 to 1420 nm (600 nm linewidth), with an electric field enhancement factor close to 20. We study the dynamical change of the position of the electric field enhancement amongst different elements in the array and, at the same time, the effects of dispersion on the scalability of the array elements. A systematic analysis and methodology to produce an array that can operate over a large bandwidth whilst maintaining the electric field enhancement without significant variation is provided.     

基于电锅炉的火电机组灵活性改造技术研究

为有效解决东北电力产能过剩,促进风电、核电等清洁能源消纳问题,提升燃煤供热机组的灵活性,针对东北地区某热电厂,通过对热电解耦时间、电锅炉型式以及不同电锅炉容量配置对机组实际发电负荷的影响等灵活性改造关键技术进行研究,确定了最佳电锅炉容量,提出了电锅炉装设方案,并对改造前后机组的调峰能力和性能指标进行对比分析。研究表明:随着电锅炉容量增长,抵减电锅炉用电后机组实际发电负荷率显著降低,提升火电机组灵活性改造后,电厂调峰能力显著提升,考虑以全厂172 MW发电负荷运行,电厂调峰能力在采暖初末期增加了368 MW,采暖中期增加了528 MW;全厂供热标煤耗由39.7 kg/GJ降低至34.3 kg/GJ,降低了5.4 kg/GJ;经济效益显著,扣除电锅炉用电成本后1个采暖季的调峰辅助服务补贴收益为1.47亿元;同时,电锅炉投运后可实现电厂的上网电量接近零,为清洁能源就地消纳做出贡献。     

电永磁吸盘在石油套管接箍切断机下料工序中的应用

针对石油套管生产过程中接箍切断岗位人员搬运接箍劳动强度大、存在安全隐患的问题，对生产工艺过程、电磁吸盘的原理和性能进行分析，采用电永磁吸盘设计了一种接箍自动下料装置。该装置可以根据设定进行电磁吸盘的充/退磁，实现整层接箍的抓取和卸料，整个过程实现一键自动下料，全程不需人工干预。现场生产应用表明，使用电永磁吸盘进行整层接箍下料，能大幅降低岗位员工的劳动强度，生产效率提高5%以上，减少了安全隐患，达到了预期目的。     

PP/PCL/石墨/碳纳米管复合材料的制备及电性能分析

采用熔融共混法制备了石墨（G）、碳纳米管（CNTs）与聚丙烯（PP）、聚己内酯（PCL）导电复合材料，通过改变G的添加量制备了系列导电复合材料。主要测试了熔体流动速率、力学性能、导电性能、电热性能，并进行了电子显微镜观察结构、差示扫描量热法分析、热失重分析。结果表明，PCL与PP混合后，PP的拉伸强度提升了4.375 MPa，在加入G/CNTs之后，力学性能受影响较大下降了约73.5 %；G/CNTs的加入还能有效降低PP的电阻率，使其从绝缘体变为半导体材料电阻率为7.83×10⁶ Ω·m；PP与PCL共混后复合材料的热稳定性得到了显著提高，初始分解温度从368.88 ℃升高至398.95 ℃，在加入G/CNTs管后又进一步提高至408.78 ℃。     

Using a pulsed electric current to reduce the susceptibility of high-strength steel to the stress corrosion cracking caused by hydrogen

Under the tensile loading, the damage of metals in the corrosive medium is the most destructive and harmful. In this study, the stress corrosion cracking behavior of H-charged high-strength steel in 3.5 wt% NaCl solution after electropulsing treatment was investigated. The experimental results from elongation, yield strength, fracture morphology, and polarization curves all demonstrate the positive effect of the pulsed processing, as it reduced the susceptibility of steel to stress corrosion cracking by removing hydrogen by electropulsing. The reduction in hydrogen content of the pulsed high–strength steels was attributed to electromigration and increased system free energy, which drove the hydrogen atoms in the steel to de–trap and reduced the susceptibility to stress corrosion cracking.     

底板带压开采工作面并行电透视探测技术应用研究

汾西矿务局水峪矿部分工作面现已面临带压开采问题，受下伏奥陶系灰岩水害影响，工作面安全回采过程中的防治水工作难度增加，尤其是带压开采工作面底板灰岩水的有效探测变得异常紧迫与重要。为了解决底板带压开采工作面富水区的探测问题，水峪矿引入了并行电透视技术，并对相应工作面进行了探测应用。并行电透视技术相对于传统音频电透视技术具有仪器智能化控制发射接收切换、一发射点并行对应多接收点、仪器智能快速高效跑极施工的3项技术优势，可体现应用现场施工高效、实际探测效果可靠的技术特点。经过对并行电透视技术及探测应用效果分析研究，证明该方法技术领先，现场施工高效，实际探测结果可靠，实用性强。